CODE: 11066 XJ Leaf Spring 4 Degree Shims with centering pins
Tired of constant driveshaft vibration? Correct your pinion angle with a set of our ALL-STEEL leaf spring degree shims. Lifting yourXJ has created new driveline angles. These degree shims aregreat for tilting the axle up for a "closer to stock" pinionangle that is important to avoid undue wear and tear on yourdriveshaft, transfer case, etc. They come zinc plated and even give you about 1/2" of lift! You also get longer 5/16" centering pins to accommodate the extralift. Available in 2, 4, 6 and 8 degrees so you can customize yourpinion angle!
Estimated Installation Time: 1.5hrs
Difficulty Level: 2
Difficulty Legend
1 - Kit includes basic components.
2 - Kit includes little to no adjustable components.
3 - Kit includes many adjustable components; may require drilling/cutting.
4 - Kit includes many adjustable components; requires welding; may require drilling/cutting.
NOTE - Labor Time and Difficulty Level assumes vehicle and/or hardware is in good condition.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(1)
4
(0)
3
(0)
2
(0)
1
(0)
Value
5.0
Quality
5.0
Service
5.0
Would recommend this product.
100%
out of 5
5
(1)
4
(0)
3
(0)
2
(0)
1
(0)
Value
5.0
Quality
5.0
Service
5.0
Would recommend this product.
100%
1 Total Reviews
Awesome Fit!
Zach
Location: CT
Date: June 25, 2019
This is the best shim kit for the XJs. To my knowledge IRO is the only company that sells shims specifically fitted for the XJs all the others are universal. That being said, these fit great. Be careful with the centerpins (aka center bolts) because they are soft they will strip easy. Use C clamps to compress the leaf pack then tighten down the centerpins. If you try to compress the leaf pack using the centerpins you risk stripping them. Do not tighten these very much (let the u-bolts do the tightening).
Recommended
Value
5
Quality
5
Service
5
1 Total Reviews
CUSTOMERS ALSO BOUGHT